|
Parquet floor coatings:
production of parquet floor coatings and treatment
The following table shows the results of the
laboratory tests we performed on surfaces treated with UV cycles for
pre-finished parquet floors, in comparison with surfaces treated with
solvent-based bicomponent polyurethane coatings for traditional
parquet floors.
The results of the UV cycles are for the most
comparable (and, in certain cases, even superior) to those achieved
with polyurethane cycles.
The most important of the tests is that for abrasion
resistance. This test simulates the typical wear and tear on a coated
parquet floor and was carried out using a Taber abrasimeter with CS-17
abrasion wheels, loaded with 1 kg weights for every 1000 revolutions.
The data in the table refers to the weight loss
expressed in milligrams: UV cycles give better results than
polyurethane cycles, particularly when treated with our special
scratch-resistant top coat, which – thanks to its special formulation
– gives first-class results.
Test tabel for UVparquet.jpg
|
Our Products are used in: |
|
|
ICA coatings is a specialist manufacturer of high-quality wood coatings wood glues, wood abrasives, wood coloring products, acrylic UV coatings, polyester UV coatings, wood furniture coatings, polyurethane coatings, waterborne coatings, frames and shutters coatings, lacquer coatings, water-based sealers, water-based UV coatings, water stains wood, water-based primers, fire-retardant products, parquet floors treatment and products for parquet floors.
|